The entire Cast Iron – Chromed Infeed table is normalization heat treated for maximum stability. Infeed Table & Fence adjustment is quickly accomplished by means of a quick-setting levers.

Utilizing a precision outboard bearing, the reliable hydro-clamping system ensures consistent quality across the entire workpiece. The unit performs admirably even during high-speed continuous operation. The spindles can be adjusted axially even if the housing bearings are locked. Used on Wider &/or Jointed Machines

All spindles are precision constructed and specially heat treated to provide maximum cutting stability and permanent accuracy. 4 Super Precision Bearings per Spindle provide the best most accurate spindles available.They are water and dust-proof. Standard spindle speed is 6,000 RPM and 7,200 or 8,000 RPM are optional.

The mechanism provides added smoothness for short workpiece feeding. The auxiliary feed rollers are power driven for effortless feeding effect, and are liftable for convenient cutter change or setup.

HEAVY DUTY GEARBOXES

The feed rollers are driven through a combination of Extra Heavy Universal Shafts and Gearboxes, ensuring no loss of power transmission. A smooth feeding effect is assured. The heavy duty gearboxes have no backlash and provides powerful and accurate feeding performance.

The Infeed Rolls work in conjunction with a limit switch to stop the machine if workpiece is too thick or there is a double up.

Adjustment of all spindles is easily effected from the front of the moulder. The adjustment points are all at the same height, for more convenient and faster adjustment.

Greasing to all critical parts is conveniently made by the centralized arrangement of color coded lubrication points along the front of the machine.

All spindles are precision constructed and specially heat treated to provide maximum cutting stability and permanent accuracy. 4 Super Precision Bearings per Spindle provide the best most accurate spindles available.

They are water and dust-proof. Standard spindle speed is 6,000 RPM and 7,200 or 8,000 RPM are optional.

Provides positive feed effect for all types of material & short and narrow stock.

Eliminating the conventional spindle load, the adjustable side pressure wheels for the left vertical spindle are pneumatically operated to ensure consistent holding pressure.

• The smooth initial feeding of the stock is achieved by means of the independently powered infeed rollers.
• There are more top and bottom powered rollers than in most competitor’s models, and this is an important reason for outstanding feeding performance.

The 7th and 8th spindles can be equipped with a trimming sawblade for trimming the wood side after moulding. This increases the wood gluing effect in wood composing operation.

• The machine is equipped with two sliding units. One for scoring saw and one for main saw, providing better slicing quality.
• The last vertical spindle can be mounted with sliding sawblades. It permits direct slicing once wood moulding is accomplished, greatly increasing efficiency.

Utilizing housing bearings, the reliable hydro-clamping system ensures consistent quality across the entire workpiece. The unit performs admirably even during high-speed continuous operation. The spindles can be adjusted axially even if the housing bearings are locked.