Vertical Machining Center
VM–600L / VM–850L / VM–1050L
Exquisite Craftsmanship / The Best Choice in Efficiency & Performance
Efficiency recognized by customers. The Yong Lida VM-L series machining center will give you an all new impression in high speed machining capability and stability.
VM–600L
X, Y, Z-axis travel: 600 x 400 x 450 mm
Pendant type operation box
Three axes linear ways
VM–850L, VM–1050L
(VM-850L) X, Y, Z-axis travel: 800 x 500 x 550 mm
(VM-1050L) X, Y, Z-axis travel: 1000 x 500 x 550 mm
Swing type operation box
Three axes linear ways
| Specifications |  |
Linear Ways on X, Y, Z-axis
Maximum Stability at High
Speed Traverse & Extreme Rigidity
All major structural parts are annealed to relieve interval stress, ensuring superior stability without deformation of structure.
The column is a pyramid structure with a golden ratio design in combination with great span and fully supported on the entire travel, which exhibits exceptional stability even at high speed traverse.
 |
|
|
 |
|
Outstanding Features
|
Linear ways on X, Y, Z-axis. |
Double-side coolant flushing devices combined with the use of chip conveyor enable chip removal efficiency to upgrade by 70 percent. |
Excellent sealing effect of the splash guard reaches 80 percent With the use of oil mist collector, sealing effect can reach up to 90 percent. |
Upon request, automated equipment is available. |
Fully enclosed splash guard. |
Linear Ways on Three Axes
X, Y, Z-axes are all mounted with high precision linear ways, providing 30 m/min (X, Y-axis) and 25 m/min. (Z-axis) of rapid traverse rates. |
 |
 |
BT40 Belt Type Spindle
8,000 rpm is standard |
10,000 rpm is optional |
The spindle is transmitted through high flexibility timing belts to eliminate slippage problems that usually occur on conventional belts. |
Outline dynamically balanced for smooth running |
|
